High Speed Double Layer Wall Panel Roll Forming Machine 8-10 M / Min

High Speed Double Layer Wall Panel Roll Forming Machine 8-10 M / Min​

Main Technical Parameters
 Width of Rolling Band Steel: 140mm
 Thickness of Rolling Band Steel: 0.6-0.9mm
 Material of Rolling Band Steel: Q235 galvanized band steel
 Producing Speed: 8-10m/min
 Length of Rolling Workpiece: random
 Length Error of Rolling Workpiece: 10m±1mm

Rolling Product Range
 Max. Thickness: 0.9mm
 Product Width: 140mm

Supply of Material & Service Range
 Fully Automatic Rolling Shutter Forming Machine’s Supply of Material

 Number of Working Roll: each of upper & lower layer 8 sets
 Structure Feature: shaft material 40Cr shows inflexibility after hardening and tempering. Rolling uses Gcr15 ball bearing steel, after quenching treatment, quenching HRC58-62, rolling with hard chrome plated on the surface. Structure mode is transmitted by guild pillar chain.
 Main Technical Parameters

 Feeding Width: 140mm
 Axle Diameter of Roll Forming Machine: 65mm
 Main Power: 5.5KW
 Producing Speed: 8-10m/min
 Rolling Material: Rolling GCR15 steel quenching, HRC58-62, hard chrome plated on the surface
 Rolling Hardness of Quenching: HRC58-62
 Main Axle of Rolling: fine quality 40Cr
 Transmission Mode: by chain

 Number of Working Roll: about 14 sets(inclusive of foam cooling reshaping track)
 Structure Feature: shaft material 40Cr shows inflexibility after hardening and tempering. Rolling uses Gcr15 ball bearing steel, after quenching treatment, quenching HRC58-62, rolling with hard chrome plated on the surface. Structure mode is transmitted by guild pillar chain.

 Function: combine upper and lower steel plate together. Rolling up both sides forming and foam cooling reshaping.

Technical Parameters
 Number of Horizontal Roll Stand: 14 sets
 Feeding Width: 140mm
 Axle Diameter of Roll Forming Machine: 65mm
 Main Power: 7.5KW
 Producing Speed: 8-10m/min
 Rolling Material: Rolling GCR 15 steel quenching, HRC58-62, hard chrome plated on the surface
 Rolling Hardness of Quenching: HRC58-62
 Quenching Mode of Rolling: salt bath furn quenching entirely
 Main Axle of Rolling: fine quality 40Cr
 Thickness of Rolling: 0.6-0.9mm
 Transmission Mode: by chain

Profile Drawing

metal roof roll forming machine

Roof Tile Roll Forming Machine

High Speed Double Layer Wall Panel Roll Forming Machine 8-10 M / Min Images